Craftsman 81998 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Měření, testování a kontrola Craftsman 81998. Craftsman 81998 Owner`s manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 17
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
Owner's Manual
Wide Range InfraRed (IR)
Thermometer
with type K input
and Laser Pointer
Model No.
81998
© Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www.craftsman.com 031808
Safety
Operation
Maintenance
Español
CAUTION: Read, understand and
follow Safety Rules and Operating
Instructions in this manual before
using this product.
79
.3
20
HOLD
LOG
0.95
91.9
HI
LOW
¡F
AT
3
Set
MODE
79
.3
20
HOLD
LOG
0.95
91.9
HI
LOW
¡F
Zobrazit stránku 0
1 2 3 4 5 6 ... 16 17

Shrnutí obsahu

Strany 1 - Owner's Manual

Owner's Manual Wide Range InfraRed (IR) Thermometer with type K input and Laser Pointer Model No. 81998 © Sears, Roebuck

Strany 2 - TABLE OF CONTENTS

10 The MODE button options The MODE button is used to access the programming functions of the instrument. The selected function is displayed on the b

Strany 3 - ONE YEAR FULL WARRANTY

11 Automatic Emissivity Adjustment The 81998 has the ability to automatically calibrate the emissivity setting. However, in order to do so, the tempe

Strany 4 - SAFETY INSTRUCTIONS

12 Over-range Indicator If the temperature measurement exceeds the specified temperature range, the thermometer will display dashes in place of a tem

Strany 5 - CONTROLS

13 IR Measurement Notes 1. The object under test should be larger than the spot (target) size calculated by the Distance-to-spot ratio diagram (prin

Strany 6 - SPECIFICATIONS

14 Distance-to-spot ratio The meter’s distance-to-spot ratio is 13:1. For example, if the meter is 13 inches from the target (spot), the diameter of

Strany 7 - General Specifications

15 Emissivity and IR Measurement Theory IR Thermometers measure the surface temperature of an object. The thermometer’s optics sense emitted, reflect

Strany 8 - OPERATING INSTRUCTIONS

16 MAINTENANCE This IR thermometer is designed to provide years of dependable service, if the following care instructions are performed: 1. KEEP THE

Strany 9

17 TROUBLESHOOTING There may be times when your meter does not operate properly. Here are some common problems that you may have and some easy solut

Strany 10

2 TABLE OF CONTENTS Warranty Page 3 Safety Instructions 4 Controls 5 Specifications 6 Battery Installation 7 Operating Instruct

Strany 11

3 ONE YEAR FULL WARRANTY CRAFTSMAN PROFESSIONAL ONE YEAR FULL WARRANTY. If this product fails due to a defect in materials or workmanship within one

Strany 12

4 SAFETY INSTRUCTIONS This meter has been designed for safe use, but must be operated with caution. The rules listed below must be carefully followed

Strany 13

5 CONTROLS 1. Laser pointer 2. IR Sensor 3. Measurement Trigger 4. Battery and Switch compartment 5. LCD Display 6. Function Buttons 7. Type-K therm

Strany 14 - Diameter of Spot

6 SPECIFICATIONS IR Non-Contact Thermometer Range /Resolution -20 to 1400°F (-28 to 760°C) / 0.1° -20 to 30°F (-28 to -1°C) ± 2.0%rdg or ±6°F/3°C w

Strany 15

7 General Specifications Display Backlit LCD display with function indicators Response time 1 second approx. Over range indication “---------“ Op

Strany 16 - MAINTENANCE

8 BATTERY INSTALLATION When the low battery symbol appears on the display, replace the meter’s battery (9V). The battery compartment is located

Strany 17 - SERVICE AND PARTS

9 Backlight and Laser Pointer 1. While pulling the Trigger, push the backlight/laser button once to turn on the backlight. 2. Press it aga

Komentáře k této Příručce

Žádné komentáře