Craftsman 82354 Uživatelský manuál

Owner's Manual Pen Multimeter with Voltage Detector Model No. 82354 © Sears, Roebuck and Co., Hoffman Estates, IL 60179

10 AC VOLTAGE MEASUREMENTS WARNING: Risk of Electrocution. The probe tips may not be long enough to contact the live parts inside some 240V outlets

11 RESISTANCE MEASUREMENTS WARNING: To avoid electric shock, disconnect power to the unit under test and discharge all capacitors before taking any r

12 DIODE TEST 1. Set the function switch to the Ω position. 2. Use the FUNC button to select the diode function 3. Insert the black test

13 MAINTENANCE WARNING: To avoid electric shock, disconnect the test leads from any source of voltage before removing the back cover or the battery

14 BATTERY REPLACEMENT WARNING: To avoid electric shock, disconnect the test leads from any source of voltage before removing the battery cover. 1. T

15 TROUBLESHOOTING There may be times when your meter does not operate properly. Here are some common problems that you may have and some easy solut

2 TABLE OF CONTENTS Warranty Page 3 Safety Instructions 4 Safety Symbols 5 Control and Jacks 6 Symbols and Annunciators 6 Specif

3 ONE YEAR FULL WARRANTY ONE YEAR FULL WARRANTY ON CRAFTSMAN PEN MULTIMETER with VOLTAGE DETECTOR If this CRAFTSMAN Pen Multimeter fails to give comp

4 SAFETY INSTRUCTIONS This meter has been designed for safe use, but must be operated with caution. The rules listed below must be carefully followed

5 SAFETY SYMBOLS This symbol adjacent to another symbol, terminal or operating device indicates that the operator must refer to an explanation in the

6 CONTROLS AND JACKS 1. Retractive positive test lead 2. Test Lead retracting nut 3. AC voltage detector and warning Light 4. Finger protection b

7 SPECIFICATIONS Function Range Resolution Accuracy Non-contact AC voltage detector 50 to 600V NA 200mV 0.1mV 2.000V 1mV 20V 0.01V 200V 0.1V DC Volt

8 Polarity Automatic (no indication for positive readings) Minus (-) sign for negative readings. Measurement Rate 2 times per second, nominal Low

9 OPERATING INSTRUCTIONS WARNING: Risk of electrocution. High-voltage circuits, both AC and DC, are very dangerous and should be measured with great